Recommend News
Rubber manufacturers will explain some knowledge about correction fluid below.
Release Date:
2021/11/17
When you write wrong, if you erase this page directly, it will not be clean, so many people will use correction fluid. If you use it improperly, you may get correction fluid on your hands, face and clothes. If you don't clean it immediately, it may affect your health. What about the correction fluid?
1. Air oil cleaning
Correction fluid is often used when correcting typos. If you are not careful, the correction fluid will stick to you and it is difficult to wash it off. In fact, there is something in common to solve this problem-balm.
2. Alcohol cleaning
If the correction fluid is dyed into clothes by mistake, please wash off the stains on the clothes with alcohol, wipe them repeatedly and rinse them with water. After drying, the stains can be removed.
3. Wash the water in your nails
The special water for nail washing can also wipe off the correction fluid and apply the correction fluid on the cloth. After the correction fluid is dry, soak the place with the correction fluid with nail polish washing water and wipe it with your hand. This seems to be a good way to wipe the correction fluid. However, nail polish washing water contains substances harmful to the skin. If the hands are covered with the correction fluid, skin cream that is harmless to the human body is preferred.
Rubber manufacturers: correction fluid purchase
1. Check the quality assurance day of the correction fluid. As the correction fluid is synthesized by AS, PC, titanium dioxide, methyl cyclohexane and other chemical substances, the correction fluid within the shelf life can play a higher tampering effect.
2. When purchasing the correction fluid, shake it so that you can hear the sound of the stirring rod or ball stirring the liquid or colliding with the bottle body. When using it, gently press the bottle body so that the liquid can be discharged smoothly. Observe whether the correction fluid is discharged normally and whether the liquid volume is too much.
3. After purchase, do not place it in a high temperature environment, do not place the liquid outlet under or put it down, and the correction fluid is not normal.
Rubber Manufacturer: Correction Fluid Use Guide
1. Shake the coating liquid before use to completely melt the sediment and water in the bottle.
2. Shake the pen tip when in use, and gently press the body of the bottle at the part that you want to correct, and you can simply write with water.
3. After use, please close the lid immediately to prevent the liquid outlet from being exposed for a long time, and do not turn the correction fluid upside down.
4. When using, do not make the nose and mouth too close to the surface of the used correction fluid. In addition, avoid splashing the correction fluid on the skin and do not wipe it by hand.
The rubber manufacturer is introduced here today. Through the above introduction, I hope it will be helpful to everyone. If you have any other questions, you can call us. If you need stationery, you can contact our company.
Keywords
Telephone: 8613331879381
Fax： 86 21 51861165
E-mail：wangxh@dhawj.com
Address: Tongxin East Road,Gaoyou City,Jiangsu, China
Dehuang Stationery Co.,Ltd
QR code